The hanging ear installation method is a separation method between the hanging ear and the honeycomb aluminum plate. The hanging ear is separately processed and connected to the adhesive seam position of the honeycomb aluminum plate. The appropriate width of the adhesive seam is ≥ 12mm. This installation method is very simple to process and very convenient to install.
This installation method involves processing honeycomb aluminum panels with installation flanges. During installation, simply connect them to the keel and adhesive joints according to their positions. The suitable adhesive joint width is ≥ 10mm. This method is convenient for installation, but slightly complex in processing and not suitable for modeling curtain wall aluminum panels.
Hook up hoisting is mainly used for the installation of suspended ceilings without edge height differences or special shapes, and the overall stability of the suspended ceiling after installation. This method is not recommended for honeycomb aluminum panels with very large spokes and very thin panels.
The lifting of Z-shaped pendants is widely used, with convenient processing and simple installation. After lifting, it can also be repaired by people, making it suitable for any type of ceiling installation.
Use the method of hanging directly from the bottom to the keel, and then fix it to the keel within reach of the upper person. This lifting method effectively solves the problem of ordinary Z-shaped pendant type plates with very wide spokes and low keels that cannot be installed by people.